Loewe I Compose Instrucciones De Manejo página 14

Connection
Connecting the Center speaker to the
subwoofer
Thread the speaker cable through the hole in the enclosed speaker cover (A). One of
the two wires of the speaker cable ( C ) is marked black. Connect these black marked
wires with the black terminal on the subwoofer ( wiring according to the picture on
the right) and the black terminal (B) on the speaker. Connect the unmarked wires
with the red terminals. Then press the cover (A) back onto the satellite speaker.
Satellite
speakers
Front
left
Power OUT
R
Surr.
L
R
Front C
L
System connector
Subwoofer
Surround
left
- 14
B
C
A
Front
right
Center
ON
OFF
Bass Intensity
Min. Max.
Phase
0 180
Line IN
Crossover Frequency
Right Subw. Left
Surr.
Front 50 250.
Right Center Left
230V~50/60Hz
Surround
right
Position the speakers as described on page 11 or mount the satellite speakers
on the wall with the wall holder or on the optional stand as described in the
respective installation instructions. Before beginning with start-up and
operation, make sure that all the cables are connected correctly.
Start-up and operation
Technical Data
Satellite loudspeakers
Dimensions satellite loudspeakers in cm
Speaker
Stand
Weight satellite loudspeakers in kg without/with stand
Fitting
Load capacity
Impedance
Transmission range
Sound pressure
Company and editorial details
Loewe AG is a public limited company under German law with its Head Office
in Kronach.
Industriestrasse 11, 96317 Kronach
Telephone +49 (0)9261 / 99-0
Fax: + 49 (0)9261 / 99-500
Email: ccc@loewe.de
Commercial Registry: District Court of Coburg, No. HRB 42243
Turnover tax identification no.: DE 193216550
WEEE registration no: DE 41359413
Editorial date 07.10. 3. edition
© Loewe Opta GmbH, Kronach
All rights reserved including translation.
Design and technical specifications are subject to change without notice
W 6,2 H 15 x D 6,2
Stand Ø 20 x H 100,5
0,7 / 3,3
2x broadband, paper diaphragm, Ø 55mm
30 W (sine) / 45 W (max. music)
8 Ohm
150 Hz–20 kHz ± 3dB
86 dB (1w/m)