Lenco DIR-270 Manual De Usuario página 16

Alarm
There are 3 independent Alarms which can be set. 2 different Alarms (Alarm
1,Alarm 2) and one NAP alarm which is a countdown alarm which can be used
when doing a quick sleep.
Press the Alarm button on the remote control to enter the alarm settings
menu directly and follow the following steps.
Setting the alarm
Press 'Alarm' button on remote control
-
- Select Alarm 1
- Select Turn On
Press the 'ok' button on the remote or press the navigation wheel on the
-
unit.
Press the 'ok' on the "Repeat:" option and select the how the alarm
-
should work.(Everyday, once or select the required days)
- Press the left arrow key on the remote or unit to return to the previous
alarm menuthen select "Time:" and press 'ok'
- You now can use the up down buttons to change the highlighted Hours
then press the right arrow button once to switch to the Minutes and use
the up/down buttons to change the minutes. Press the 'ok' button to
confirm.
Select the "Sound:" and press the 'ok' button. Now you can choose
-
between Beep, Melody, Internet Radio, FM, DAB/DAB+, USB, CD, Spotify
Connect mode.
When internet radio is selected as wake up sound, you can use one of
your favorite radio stations (which have to be stored as favorite on the
DIR-270).
Note:when no internet connection is available within 1 minute after
the alarm is activatedthe DIR-270 will automatically switch to Melody.
When selecting USB as wake up sound, you can select one of the music
files stored on the inserted usb memory device.
Repeat the above steps to setup the alarm 2
Setting the NAP alarm
Press 'Alarm' button on remote control
-
- Select NAP alarm
- Use the up/down buttons to choose the desired minutes. You can choose
5/10/20/30/60/90 or 120 minutes and then press the 'ok' button to
select
- Press the left arrow button to return to the main screen
When the NAP alarm is activated you see a clock icon on the lower right corner
with the remaining time.
16