Publicidad
The soldering tips are chrome galvanized on the
surface and should be bright silver without waste
or welding on it.
If there is a venting or deformation on the tip,
replace it. Remember to prepare the tip with tin
for the next use.
WHEN NOT IN USE
If a soldering iron has not a consistent and thin
layer of solder or tin, then the tip has not been
properly prepared. When not using the soldering
iron, make sure to leave a large chunk of solder
on the tip.
This will keep the tin in the tip and the tip will
last much longer. Many technicians mistakenly
clean the tip before stopping using the soldering
iron. Leave the solder on the tip to protect it.
TECHNICAL DATA
VOLTAGE-FREQUENCY: 127 V ~ 60 Hz
TEMPERATURE: 440˚C
POWER: (20 - 50) W
POWER CONSUMPTION: 0,03 kWh
Publicidad
