NeuLog BAT-200 Guia Del Usuario página 18

18
Home
NeuLog battery module BAT-200
The Battery module supplies power to a sensor, or chain
of sensors, operating in the off-line mode, and to sensors
connected to a RF Communication module.
This module can be checked for the 'goodness' of its
internal battery by pressing its pushbutton. This will turn
ON its light emitting diode (LED) when the battery is OK.
The Battery module is a rechargeable battery module
that can be recharged by connecting it to the PC's USB
socket via the included USB cable.
The Battery module has a LED and a pushbutton switch.
The LED indicates whether the battery is charged
enough or not when pressing the pushbutton.
Using NeuLog battery module
The battery module is required where a sensor or a
module is not connected to a PC, MAC or a tablet.
RF Modules
Materials needed:
 Two RF-200 RF communication modules
 USB-200 USB module
 BAT-200 Battery module
 Any NeuLog sensor
How to use the system is described in the RF module
guide.
V2018.01 English