cecotec BOLERO COOLMARKET 2D Origin 86 Manual De Instrucciones página 49

1. PARTS AND COMPONENTS
Fig. 1
1. Freezer compartment
2. Temperature knob
3. Shelf
4. Drawer cover
5. Drawer
6. Door shelf
7. Light switch
8. Door shelf
Note:
The graphics in this manual are schematic representations and may not exactly match the
appliance.
2. BEFORE USE
This appliance is packaged in a way as to protect it during transport. Take the appliance
-
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any
-
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
3. INSTALLATION
Installation
1. Place the refrigerator on a completely flat surface. Leave 5~10 cm between each side of
the appliance and the wall, and 30 cm between the top of the appliance and the ceiling.
2. Choose a place that is not exposed to sunlight, high temperatures, or humidity, as moisture
can cause stains.
3. Remove the bottom panel before installation.
4. The appliance can be adjusted via its two front support feet. You can raise the appliance by
turning them clockwise.
5. Choose a solid and flat surface for installation. Improper levelling and installation can
cause noise and vibrations:
BOLERO COOLMARKET 2D ORIGIN 86 RED/BEIGE/BLACK/BLUE/GREEN
ENGLISH
49