Descargar Imprimir esta página

VITO AUTO VICB10E Manual De Instrucciones página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
OVERLOAD PROTECTION
Figure 11: the flat fuse provides
protection from polarity reversal and
short-circuiting. A defective fuse has
to be replaced by one of identical.
Please note: at automatic circuit-
breaker interrupts the charging in the
event of thermal overloading. The
circuit-breaker switches on again
automatically after a cooling interval.
SERVICING AND CLEANING
THE BATTERY AND
CHARGER
Make sure that your battery is always
fitted securely in the vehicle.
Check that the battery is properly
connected to the vehicle's electric
system. Keep the battery clean
and dry. Apply a little acid-free and
acid-resistant\grease (Vaseline) to
the terminals.
The level of acid in non-maintenance-
free batteries should be checked
about every 4 weeks. Top up with
distilled water as necessary.
Keep the charger in a dry room.
Remove any sighs of corrosion from
the charging terminals.
10
CORRECT DISPOSAL
OF THIS PRODUCT
This marking indicates that this
product should not be disposed with
other household wastes throughout
the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal, recycle
it responsibly to promote sustainable
reuse of material resources. To
return your used device, please use
the return and collection systems or
contact the retailer where the product
was purchased.
They can take this product for
environmental safe recycling.
DECLARATION OF
CONFORMITY
We declare under our exclusive
responsibility, that the product Meets
the following standards
or standardization documents:
EN 55014-1:2017, EN 55014-
2:2015, EN 61000-3-2:2014,
EN 61000-3-3:2013, EN
60335-1:2012/A2:2019, EN
60335-2-29:2004/A11:2018, EN
62233:2008, AfPS GS 2019:01
PAK:
2014/30/EU –
Electromagnetic Compatibility
Directive
2014/35/EU –
Low Voltage Directive
WARRANTY TERMS
The warranty for this product is in
accordance with the law in force
from the date of purchase. You
should, therefore, keep your proof
of purchase during this period. The
warranty covers any manufacturing
defect in material or operation, as
well as parts and work needed for
their repairing.
Excluded from the warranty are
the misuse of the product, any
repairs carried out by unauthorized
individuals (outside the service
center of the brand VITO) as well as
any damage caused by its use.
10

Publicidad

loading