BAT EM 231 Instrucciones De Uso página 29

EM 231 Operating instructions
GB
(see previous section). Now press the SET button (5) until
the hour display starts flashing and press the UP button (4)
to set the hours for the starting point. Repeat this proce-
dure for the minute display. Finally press the SET button (5)
to finish price 1 settings.
Set Cost/kWh (Price 2)
Setting the cost/kWh for price 2 is similar to price 1.
Ensure that at the beginning price 2 (18) is displayed.
Press the FUNC button (6) to toggle the display to show
price 2 (18) before starting the setting procedure with the
SET button (5).
Display Metering Functions
Repeatedly press the FUNC button (6) to cycle through the
following information: VOLTAGE, CURRENT, WATT – kWh
- TOTAL PRICE (10, 18).
Press the FUNC button (6) to display the current draw of
the connected appliance in the value field (10) on the LCD,
AMP (11) is displayed in the unit section and the POWER
FACTOR (27, 28).
Press the FUNC button (6) again to display the wattage of
the connected appliance in the value field (10) on the LCD,
WATT (12) is displayed in the unit section and the POWER
FACTOR (27, 28).
29