Lelit Pro Mara Serie Manual De Uso página 41

C
Switch on the coffee machine
Caution.
Ensure the power supply voltage is the same as that indicated on the
information plate and that the supply system has an adequate circuit breaker.
C.1 Connect the power cord (c) to the socket on the back of the machine.
C.2 Plug into the power outlet.
C.3 Switch the machine on by pressing the main on/off switch (7).
C.4 The machine is switched on when the machine on LED (2) and the heating
element LED (10) are on.
C.5 Wait for the heating element LED (10) to switch off.
D
Checking that the machine is working properly
Coffee
D.1 Insert the filter holder (e) without any coffee in the distribution unit (13) and
fasten it firmly, at least up to align the handle with the padlock symbol indicated
on the group.
D.2 Raise the coffee lever (14) to allow about half a litre of water run out.
D.3 Once the required quantity is reached, return the lever (14) to the start
position to stop the flow of water.
Note.
This allows the water circuit to fill up completely and rinses it out at the same
time.
Hot water
D.4 Place a jug under the hot water nozzle (12).
D.5 Turn the hot water knob (11) anti-clockwise.
D.6 After about one litre of water has come from the nozzle (12) turn the knob
(11) clockwise to close it.
Steam
D.7 Point the steam wand (4) at the drip tray rack (8).
D.8 Turn the steam knob (3) anti-clockwise.
D.9 When steam starts coming out of the steam wand turn the knob (3)
clockwise to close it.
Note.
Only for the PL62T model: check that the PID controller reaches the ideal
temperature of 121°C pre-set by the factory. To change this setting, read the paragraph on
"Changing the settings".
Lelit Espresso - English
41