Descargar Imprimir esta página

Craftsman 358.792400 Manual página 2

Publicidad

Idiomas disponibles

Idiomas disponibles

Warranty Statement
2
Service & Adjustments
10
Safety Rules
2
Storage
10
Assembly
6
Parts List
11
Operation
7
Spanish
12
Maintenance
9
Parts and Ordering
Back Cover
FULL ONE YEAR WARRANTY ON CRAFTSMAN L_LAWN EDGER ATTACHMENT
For one year from the date of purchase, when this Craftsman Lawn Edger Attachment
is maintained and lubricated according to the operating and maintenance instructions
in this manual, Sears will repair, free of charge, any defect in materials or workmanship.
This warranty excludes expendable parts that become worn during normal use.
If this Lawn Edger Attachment is used for commercial purposes, this warranty applies
for only 90 days from the date of purchase.
If this Lawn Edger Attachment is used for rental purposes, this warranty applies for
only 30 days from the date of purchase.
This warranty applies only while this product is in use in the United States.
WARRANTY SERVICE IS AVAILABLE BY RETURNINGTHE CRAFTSMANLAWN EDGER
ATTACHMENTTO THE NEAREST SEARS STORE OR SERVICE CENTER IN THE UNITED
STATES.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Sears, Roebuck and Co., D/817 WA, Hoffman Estates, IL 60179
41_WARNING:
When using garden-
ing appliances,
basic safety precau-
tions must always be followed to re-
duce the risk of fire and serious injury.
Read and follow all instructions.
This power unit can be dangeroust
Operator is responsible for following
instructions and warnings on unit and
in manual,
Read entire instruction
manual before using unit! Be thor-
oughly familiar with the controls and
the proper use of the unit, Restrict the
use of this unit to persons who have
read, understand and will follow the
instructions and warnings on the unit
and in the manual,
Never allow chil-
dren to operate this unit.
INFORMATION
ON THE UNIT
OPERATOR SAFETY
DANGER:
RISK OF CUT.
KEEP HANDS AND FEET AWAY
FROM BLADE AND CUTTING AREA.
Do not attempt to clear away cut ma-
terial or hold material to be cut when
the blade is in motion.
Make sure
powerhead is stopped and spark plug
wire is disconnected
(or powerhead is
disconnected
from power source)
when removing jammed material from
the cutting blade, Do not grab or hold
attachment
by the cutting blade.
• Dress properly, Always wear safety
glasses or similar eye protection when
operating, or performing maintenance
on your unit (safety glasses are avail-
able). Eye protection should be
marked Z87,
• Always wear face or dust mask if op-
eration is dusty,
• Always wear heavy, long pants, long
sleeves, boots, and gloves.
• Always wear foot protection.
Do not
go barefoot or wear sandals.
• Secure hair above shoulder length
Secure or remove loose clothing or
clothing with loosely hanging ties,
straps, tassels, etc. They can be
caught in moving parts.
• Being fully covered also helps protect
you from debris and pieces of toxic
plants thrown by spinning blade,
• Stay alert. Do not operate when you
are tired, ill, upset, or under the influ-
2

Publicidad

loading