Publicidad
Idiomas disponibles
Idiomas disponibles
[A WARNINGJ
Before using your
cutter,
it is critical that you read and understand
these
safety
rules.
Failure
to follow
these
rules could result
in serious
injury to you or damage
to the cutter.
Good safe_ practices are a combina_n
of common
sense, staying alert and undemtanding
howto
use your
power tool. To avoid mistakes that could cause sedous
mJury, do not plug in your cutter until you have read and
understood
the following safety rules:
1.
READ and become
familiar with this entire Owner's
Manual.
LEARN the tool's applications,
limitations and
possible hazards.
2. IA WARNINGJ
Look for this symbol that identif'ms important safety
precautions.
It means CAUTIONI
BECOME
ALERTt
YOUR
SAFETY
IS INVOLVEDI
15,
16.
17.
18.
REMOVE
ADJ_
KEYS
AND WRENCHES.
Form the habit of checking to see that keys and
adjusting wrenches are removed from the tool before
turning "ON'.
NEVER
LEAVE TOOL
RUNNING
UNATTENDED.
TURN
THE POWER
"OFF".
Do not leave the tool
before it comes
to a complete
stop.
NEVER
STAND
ON TOOL.
Serious injury could
occur if the tool is tipped or if the cutting tool is
unintentionally
contacted.
DO NOT OVERREACH.
Keep proper footing and
balance
at all times.
3.
KEEP
GUARDS
IN PLACE and in working order.
4.
DO NOT USE IN A DANGEROUS
ENVIRONMENT
such as damp orwet
locations or exposure to rain.
Keep work area well lighted.
5. DO NOT use power tools in the presence of
flammable liquidsor gases.
6.
KEEP
WORK AREA CLEAN.
Cluttered areas and
workbenches
invite accidents.
7.
KEEP
CHILDREN
AWAY.
All visitors should be kept
at a safe distance from the work area.
8.
DO NOT
FORCE
THE TOOL
ItwHIdothejobbetter
and safer at the rate for which if was designed.
9.
USE THE RIGHT
TOOL.
Do not force the tool or
attachment
to do a job for which it is not designed.
10. WEAR
PROPER
APPAREL.
DO NOT wear loose
clothing, gloves, neckties, rings, bracelets
or other
jewelry that may get caught in moving pans.
Non-slip
footwear is recommended.
Wear
protective hair
covering
to contain long hair.
19. MAINTAIN
TOOt_
WITH CARE.
Keep tools sharp
and clean for molt efficient and safest performance.
Follow instruc_ofls for lubricating and changing
accessories.
20. CHECK
FOR D_Mt, GED PARTS.
Before further use
of the tool, a guaed or other part that is damaged
should be carefuNy checked
to ensure it will operate
properly and perfoml
its intended function.
Check for
alignment
of moving parts, binding of moving parts,
mounting and any _her
conditions
that may affect its
safe operation.
Aguard
or other part that is damaged
should be properly repaired
or replaced.
21. MAKE WORKI_IOIP
CHLD
PROOF
with padlocks,
master switches or by removing
starter keys.
22. DO NOT operate the tool if you are under the
influence of any drugs, alcohol or medication
that
could impair your abHify to use the tool safely.
23. USE DUST
COLLECTION
SYSTEM
wherever
ossible.
Dust generstod
from certain materials can
e hazardous
to your health and in some cases, a fire
hazard.
Always operate the power tool in a well
ventilated area with adequate
dust removal.
11. WEAR
A FACE MASK OR DUST
MASK.
Sawing,
cutting, drilling and sanding operations
produce
hazardous dust.
12. DIe, CONNECT
TOOLS
FROM THE POWER
SOURCE
before servicing and when changing
accessories
such as blades, bits, cutters, etc.
13. REDUCE
THE RISK OF UNINTENTIONAL
STARTING.
Make sure the switch is in the "OFF"
position before plugging into the power source.
14. USE ONLY RECOMMENDED
ACCESSORIES.
Consult the Owner's Manual for recommended
accessories.
The use of improper accessories
may
cause injury to you or damage
to the tool.
24. ALWAYS
WEAR EYE PROTECTION.
Any power
tool can throw foreign objects
into your eyes which could
cause permanent
eye damage.
ALWAYS
wear safety goggles
(not glasses) that comply
with
ANSI safety stenderd Z87.1.
Everyday glasses
have
only impact
reststont lenses.
They ARE NOT safety
glasses.
Safety goggles are available at Sears.
I& WARNll_I
Glasses
or gollIlII
not In compliance
with ANSI
Ztt7.1 could cI
I_dous
injury
when they break.
SAVE THESE INSTRUCTIONS FOR REFERENCE
Publicidad
