Malfunctions; Technical Specifications - Tunturi R 3.0 Manual Del Usuario

Ocultar thumbs Ver también para R 3.0:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 41
meter. Open the battery box cover carefully from its lower
edge. Be careful not to damage the wires. Replace the
batteries (4 "C" batteries) in the battery box according to
the markings. Replace the cover.
Pull-bar battery: If the pull-bar controls cease to respond
completely, replace the battery (3V lithium cell CR2032).
Open the cover of the battery box on the back of the
pull bar by removing the attachment screw. Replace the
battery; make sure you place it in the right direction inside
the holder. Replace the cover.

MALFUNCTIONS

Despite continuous quality control, defects and
malfunctions caused by individual components may
occur in the equipment. In most cases it's unnecessary to
take the whole device in for repair, as it's usually sufficient
to replace the defective part.
If the equipment does not function properly during use,
contact your Tunturi dealer immediately. Always give the
model and serial number of your equipment. Please state
also the nature of the problem, conditions of use and
purchase date.
If you require spare parts, always give the model, serial
number of your equipment and the spare part number for
the part you need. The spare part list is at the back of this
manual. Use only spare parts mentioned in the spare part
list.
TECHNICAL
SPECIFICATIONS
Length
200 cm
Width
48 cm
Height
56 cm
Weight
46 kg
The R3.0 meets the requirements of the EU's EMC
Directives on electromagnetic compatibility (89/336/EEC).
This product therefore carries the CE label.
The R3.0 meets EN precision and safety standards (EN-
957).
Due to our continuous policy of product development,
Tunturi reserves the right to change specifications without
notice.
NOTE! The instructions must be followed carefully in
the assembly, use and maintenance of your equipment.
The warranty does not cover damage due to negligence
of the assembly, adjustment and maintenance instructions
described herein. Changes or modifications not expressly
approved by Tunturi will void the user's authority to
operate the equipment!
WE WISH YOU MANY ENJOYABLE TRAININGS WITH YOUR
NEW TUNTURI TRAINING PARTNER!
8

Publicidad

Tabla de contenido
loading

Tabla de contenido