Sony Handycam HDR-CX550 Guía De Operaciónes página 16

You can charge the "InfoLITHIUM" battery pack (V series) after attaching it to your
camcorder.
(_ Notes
• 5_u cannot attach any "InibLITHIUM" battery pack other than the V series to your camcorder.
Turn offyour camcorder by closing the LCDscreen after replacing the
viewfinder.
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
4
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
• Align the • mark on the DC
plug
with that on the DC IN jack.
The _/CHG (flash/charge) lamp lights up and charging starts. The $/CHG (flash/charge)
lamp turns off when the battery pack is fully charged.
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
_Tips
• See page 72 on recording and playing time.
• When your camcorder is on, you can check the approximate amount of remaining battery power with the
remaining battery indicator at the upper left on the LCD screen.
To remove the battery pack
(;lose the LCD screen. Slide the BATT (battery) release lever ((_)) and remove the battery
pack (@).
1;