Sony Handycam HDR-CX550 Guía De Operaciónes página 17

To use a wall outlet (wall socket) as a power source
Make the same connections as "Step 1: Charging the batter), pack." Even if the batter), pack is
attached, the battery pack is not discharged.
Notes on the battery pack
• When you remove the battery pack or disconnect the AC Adaptor, replace the viewfinder, close the L('D
screen and make sure that the H (Movie)/O (Photo) lamps (p. 24), the access lamp (p. 23) are turned
offl
• The ,_/CHG (flash/charge) lamp flashes during charging under the fbllowing conditions:
- The battery pack is not attached correctl?c
- The battery pack is damaged.
- The temperature of the battery pack is lox_c
Remove the battery pack from your camcorder and put it in a warm place.
- The temperature of the battery pack is high.
Remove the battery pack from your camcorder and put it in a cool place.
• When attaching a video light (sold separately), it is recommended that you use an NP-FV70 or NP-FVI00
battery pack.
• We do not recommend using an NP-FV30, which only allows short recording and playback times, with
your camcorder.
• In the defimlt setting, the power turns off automatically if you leave ?,our camcorder without any
operation fbr about 5 minutes, to save battery power ([A.SHUT OFF]).
Notes on the AC Adaptor
• Use the nearby wall outlet (wall socket) when using the A(" Adaptor. Disconnect the A(" Adaptor fl'om
the wall outlet (wall socket) immediately if any malfunction occurs while using ?,our camcorder.
• Do not use the AC Adaptor placed in a narrow space, such as between a wall and lurniture.
• Do not short circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This
may cause a malfunction.
Charging the battery pack abroad
Yo u can charge the battery pack in any countries/regi0ns using the AC Adaptor
suppl!ed with
YOur camc0rder within the AC 100 V: 240 V, 50 HZ!60 H z range:
Do not use an electronic voltage transformer.
63
¢D
5"
_7