Publicidad
Idiomas disponibles
Idiomas disponibles
Service
1, Too|
service
must
be
performed
only
by qualified
repair
personnel,
2. When
servicing
a tool,
use
only
identical
replacement
parts.
Use
only
authorized
parts.
3.
Use
on|y
the
lubricants
supplied
with
the
tool
of specified
by the
manufacturer.
Air source
1. Never
connect
to an air
source
that
is capable
of exceeding
115psi.Over
pressurizing
the tool is able to result in busting, abnormal
operation,
and breakage
of the
tool or serious injury to persons.
Use only clean, dry, regulated
compressed
air at the rated
pressure or within the rated pressure
range as marked on the tool. Always verify prior to using
the tool that the air source has been adjusted to the rated air pressure or within the rated
air-pressure
range.
2. Never use oxygen, carbon dioxide, combustible
gases or any bottled gas as an air source for
the tool. Such gases are capable of explosion
and serious injury to persons.
USER-MAINTENANCE
INSTRUCTIONS
SAVE
THESE
iNSTRUCTiONS
ENG-4
Publicidad
