AstroAI GL-1402A Manual Del Usuario página 8

TROUBLESHOOTING
Trouble: Air Leaking
Solution
It is normal for air to leak slightly when the chuck is connected
and removed from the tire valve.
Check if there is a strong seal between the chuck and tire valve.
Adjust the angle between the air chuck and tire valve.
Check all the connection points of the air compressor, inflator,
quick-connect fitting, air chuck, and tire valve stem. All
connections should not leak; threads may require Teflon tape for
a complete seal.
Contact us for help.
Trouble: Inaccurate Reading
Solution
Adjust the angle between the air chuck and the tire valve to
ensure a strong seal.
Small reading di erences between gauges are normal. For large
discrepancies, please contact us for help.
Trouble: Slow Inflation
Solution: It takes approximately 2 minutes to inflate a normal car
tire from 0 to 35 PSI. If it takes longer to do so, please contact us.
Trouble: Backlit Will Not Turn on
Solution: Press the Backlit button. If it does not work, replace the
battery.
- 07 -
EN