Publicidad
Idiomas disponibles
Idiomas disponibles
EN
OPERATING LIMITS
Model OMNIA UL_R - UL_RI
Ambient temperature limits
0°C<Ta<40°C
Ambient humidity maximum
<85% RH
limit
Maximum water inlet tem-
perature
Maximum operating pressure
Protective rating
SAFETY SYMBOLS
Danger
Moving parts
Electrical danger
\
14
10. GENERAL WARNINGS FOR THE INSTALLER
27-37
The Omnia UL_R and UL_RI units are manufactured in
accordance with recognised technical standards and
safety regulations. It is a terminal unit which contains,
within one device, the best solution for heating, cool-
ing and dehumidification. They must be used for the
80°C
purpose for which they are intended and compatible
with their performance characteristics. All contractual
8 bar
and extra-contractual liabilities for damage caused to
IP20
persons, animals or objects or through errors of instal-
lation, control or maintenance or from improper use
are excluded by the Company. Any uses not expressly
indicated in this manual are not permitted.
10.1. CONSERVATION OF DOCUMENTATION
1.
Consign the instructions with all the comple-
mentary documentation to the user of the unit
who will assume responsibility for the conserva-
tion of the instructions so that these are always
available in case of need.
2.
Carefully read this document. The execution of
all the works must be carried out by qualified
personnel, in accordance with the national
regulations.
3.
Do not modify or tamper with the unit as this
may cause danger for which the manufac-
turer will not accept any responsibility for any
damages caused. The warranty is voided if the
above instructions are not followed.
11. RECEIVING THE UNIT
The fan coil units are shipped with standard
packaging consisting of expanded polysty-
rene shells and cardboard.
11.1. CHECKS ON RECEPTION
On receiving the unit it is required to check
that:
− the packages correspond to that shown
on the document accompanying the
goods
− the packaging is intact
− the unit and panels are undamaged
− all components are present.
In the event that damage is notices or com-
ponents are missing, this must be recorded
on the transport documents.
10.2. SAFETY WARNINGS AND INSTALLATION
STANDARDS
1.
The unit must be installed by a competent and
qualified technician, and in accordance with
the legislation applicable in the country of
installation.
Aermec assumes no responsibility for damage
caused by failure to observe these instructions.
2.
Before commencing any works it is necessary to
CAREFULLY READ THE INSTRUCTIONS AND
MINIMISE ANY RISKS BY TAKING APPROPRI-
ATE SAFETY PRECAUTIONS. All relevant per-
sonnel must be made aware of the procedures
and possible risks that may arise at the time of
installation of the unit.
3.
The unit must be installed in such a way to
make maintenance and/or repair functions
possible.
10.3. PRODUCT IDENTIFICATION
The fan coil units are identified by:
− PACKING LABEL
that records the product identification label
− NAMEPLATE
Radiant technology under licence
WARNING:
The tampering, removal or absence
of the identification label renders
difficult any operation of installa-
tion or maintenance.
Nameplate
Omnia UL_R/UL_RI 27-37
IUL_R-UL_RIPI. 2307-C6976485_00
Publicidad
