AERMEC OMNIA UL_R 27 Manual De Instrucciones E Instalación página 16

EN
13. WALL OR FLOOR INSTALLATION
13.2.1. I
nstallatIon
− Remove the casing by unscrewing the
screws.
− For floor mounting ensure a minimum
clearance of 80 mm from the ground. For
floor mounting with the foot accessory
refer to the instructions supplied loose with
the accessory.
− For wall mounting the support structure
must be completely flat. Use four expansion
plugs (not supplied) suitable for the wall, to
attach the unit.
− Attach any accessories.
− To modify the electronic thermostat
dip-switch settings access through the
panel on the side of the unit (see chapter
ELECTRICAL CONNECTIONS "DIP-SWITCH
SETTINGS").
− Carry out all connections.
− Mount the casing.
− Check the correct operation of the fan coil
unit.
− Fit the air filter.
Model OMNIA UL_R - UL_RI 27
A (mm) 980
B (mm) 725
C (mm) 701.5
D (mm) 629
E (mm) 735
1 Adjustable discharge louvres
2 Casing
3 Main structure
4 Foot (accessory)
5 Connection space
WARNING
The support structure must be com-
pletely flat. Use four expansion plugs
(not supplied) suitable for the wall, to
attach the unit.
16
37
1200
945
921.5
849
955
WALL MOUNTED
Omnia UL_R/UL_RI 27-37
WALL MOUNTED WITH FEET ZU
(accessory)
IUL_R-UL_RIPI. 2307-C6976485_00