Descargar Imprimir esta página

Kenmore ELITE 100.94006 Guía De Uso Y Cuidado página 7

Moledor comercial y elaborador de cafe 12 tazas

Publicidad

Idiomas disponibles

Idiomas disponibles

BREWING COFFEE cont.
10.
11.
Close the filter Basket
Door. Place carafe on the Warming
plate. Turn on the
coffeemaker
by pressing
the ON/OFF
button.
The ON/OFF
button will be backlit.
When the brewing
cycle is finished,
the coffeemaker
beeps 5 times.
Coffee
continues
to enter the carafe
for several
seconds.
The Coffeemaker
automatically
switches
to the warming
mode. The Coffee
cup icon in the LCD display
window
flashes.
For delayed
brewing,
see
SEI-FING
THE CLOCK,
TIMER AND
AUTO-BREWING.
When you are finished
using up the coffee in the carafe,
press the ON/OFF
button to turn off the appliance,
and remove
the carafe from the warming
plate.
NOTE: If the coffeemaker is not turned off, it will keep the coffee warm
for two hours and then automatically
shut off.
PAUSE AND POUR FEATURE
The pause
and pour feature
enables
you to remove
the carafe from the Coffeemaker
and pour a cup of coffee
before
brewing
is finished.
When
the carafe
is removed,
a special valve stops the flow of coffee from the brew basket
to the carafe.
Brewing
does not stop.
If the carafe
is not replaced
under the brew basket
after 20 seconds,
water and coffee will overflow
from the brew basket.
SE'n'ING
THE CLOCK, TIMER AND AUTO-BREWING
Use the Hour and Minute
Buttons
TO SET THE CLOCK:
.
.
Set the time of day by pressing
the Hour and Minute
buttons.
Be sure to set the
time with the correct AM and PM designation.
You can make the hours and minutes
move more quickly
in the clock display
by
holding
the buttons
in. The clock starts a few seconds
after you finish setting
it.
USE THE Program
Button
TO PROGRAM
AN AUTOMATIC
BREW TIME:
1. First set the clock.
See directions
above.
.
.
.
.
Press and hold the Program button until the button's indicator light flashes to let
you know you are in programming
mode.
Set the time you wish the coffeemaker
to begin brewing
by pressing
the Hour
and Minute
buttons.
Be sure to set the correct
designation
of AM or PM.
You can make the hours and minutes
move more quickly
in the clock display
by holding
the buttons
down.
When
you have set the brew time, press the Program
button again and the
Coffeemaker
will begin to count down to the programmed
time. The Program
button stays backlit to show the Coffeemaker
is in the program
mode.
The coffeemaker
will shut itself off 2 hours after the brewing
finishes.
At this time another
long beep will sound. A long beep also sounds
when
the coffeemaker
is turned
OFF.

Publicidad

loading