Intellinet Network Solutions IPE-2G Instrucciones página 2

This guide presents the basic steps to
set up and operate this device.
For the user manual and specifications, visit
intellinet-network.com. Register your product
at register.intellinet-network.com/r/561266
or scan the QR code on the cover.
Connections
1 Plug a Cat5e/6 Ethernet cable — up to 100 m long — from
your powered source device (for example, a PoE injector or
switch) into the PoE In connector on the extender/repeater.
2 Plug a Cat5e/6 Ethernet cable — also up to 100 m long
— from the device you want to transmit power and data
to (for example, a PoE network camera ) into the PoE
Out connector on the extender/repeater. Repeat this
step for up to two PoE devices. This extender/repeater
supports the IEEE 802.3at protocol and is designed to
work with all IEEE 802.3af- or IEEE 802.3at-compliant
devices. NOTE: This device cannot be daisy-chained.
2 English
Instructions