Publicidad
WARNING!: READ THE INSTRUCTION BOOKLET THOROUGHLY
EN
BEFORE USING THE MACHINE. Keep for future reference.
INDEX
1. GENERAL INFORMATION ............................................ 1
1.1
How to read the manual ....................................... 1
1.2
References ........................................................... 1
2. SAFETY REGULATIONS .............................................. 1
2.1
Training ................................................................ 1
2.2
Preliminary procedures ........................................ 2
2.3
During operation................................................... 2
2.4
Maintenance, storage........................................... 2
2.5
Battery / battery charger ....................................... 2
2.6
Environmental protection ..................................... 2
3. GETTING TO KNOW THE MACHINE ............................ 3
3.1
Description of the machine and planned use ....... 3
3.2
Main components (Fig. 1) ..................................... 3
3.3
Identification label (Fig. 1) .................................... 4
3.4
Safety warning signs (Fig. 1)................................. 4
4. ASSEMBLY.................................................................... 4
4.1
Unpacking (Fig.2) ................................................. 4
4.2
assembly THE HANDLE (Fig.3) ........................... 4
4.3
CUTTING HEIGHT ADJUSTMENT (Fig.4) .......... 4
5. CONTROLS .................................................................. 4
5.1
Safety key (Deactivation device) .......................... 4
5.2
Control lever ......................................................... 4
6. USING THE MACHINE .................................................. 5
6.1
Preliminary procedures ........................................ 5
6.2
Safety checks ....................................................... 5
6.3
Ignition ................................................................. 5
6.4
Working .............................................................. 5
6.5
Stop 5
6.6
After use ............................................................... 6
7. MAINTENANCE ............................................................ 6
7.1
Battery ................................................................. 6
7.2
Cleaning ............................................................... 6
7.3
Cutting means ..................................................... 7
8. STORAGE ..................................................................... 7
8.1
Storing the machine ............................................. 7
8.2
Storing the battery ................................................ 7
10. ASSISTANCE AND REPAIRS ........................................ 7
11. WARRANTY COVERAGE ............................................. 7
12.
Problem identification ........................................... 8
13. OPTIONAL ATTACHMENTS ......................................... 9
13.1 Batteries ............................................................... 9
13.2 Battery charger .................................................... 9
1.
GENERAL INFORMATION
1.1
HOW TO READ THE MANUAL
NOTE or IMPORTANT
further information on what has already been said,
and aim to prevent damage to the machine.
The
symbol highlights danger. Failure to observe
the warning can lead to the risk of injury to oneself and
others and/or damage.
The paragraphs highlighted in a square with
grey spots indicate the optional characteristics
not on all models documented in this manual.
Check if the characteristic is on this model.
Whenever reference is made to a position on the
machine "front", "back", "left" or "right" hand side,
this refers to the operator's working position.
1.2
REFERENCES
1.2.1
Figures
The figures in these instructions for use are numbered 1, 2,
3, etc.
The components indicated in the figures are identified with
letters A, B, C, and so on.
Reference to component C in figure 2 is indicated with the
wording: "See fig. 2.C" or simply "(Fig. 2.C)".
The figures are given as a guide only. The actual pieces can
differ from those illustrated in this document.
1.2.2
Titles
The manual is divided into chapters and paragraphs. The
title of paragraph "2.1 Training" is a subtitle of "2. Safety
regulations".
References to titles or paragraphs are marked with the
abbreviation chap. or par. and the relevant number. Example:
"chap. 2" or "par. 2.1"
2.
SAFETY REGULATIONS
2.1
TRAINING
Read these instructions carefully before operat-
ing the machine. Become acquainted with the controls
and the proper use of the machine. Learn how to stop
the motor quickly. Failure to follow the warnings and in-
structions may result in electric shock, fire and/or seri-
ous injury. Save all warnings and instructions for future
reference.
• Never allow children or persons unfamiliar with these
instructions to use the machine. Local regulations may restrict
the age of the operator.
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
EN - 1
these give details or
Publicidad
