SP6723
5/3/09
9:33
PM
Page
3
• Do not use with damaged cord, plug or
other parts.
• Keep cord away from heated surfaces.
• Do not handle plug or the Air Blower
with wet hands.
• Use only on GFCI protected outlets.
• Do not use an extension cord with this
Air Blower.
Do
not
lift Air
Blower
using
the
retractable handle.
• Do not use
retractable
handle
and
wheels for going up and down stairs.
• Do
not operate
this
machine
near
flammable
or
combustible
liquids,
gases, or explosive dusts like gasoline
or other fuels, lighter fluid, cleaners, oil-
based paints,
natural
gas, hydrogen,
coal dust, magnesium
dust, grain dust,
or gun powder.
• Do not use or store near hazardous
or
toxic materials.
If your Air Blower is not working
as it
should,
has missing
parts, has been
dropped,
damaged,
left outdoors,
or
dropped
into water,
return it to any
Sears store, Sears Service Center, or
other Craftsman outlet.
Do not put any object into ventilation
openings.
Do not operate
with
any
ventilation openings blocked; keep free
of dust, lint, hair or anything that may
reduce air flow.
• Keep hair, loose clothing, fingers, and
all parts of body away from openings
and moving parts.
• Do not allow to be used as a toy. Close
attention is necessary
when used near
children.
Do not use as a hand truck.
To reduce the risk of eye injury, wear
safety eyewear. The operation
of any
utility Vac or blower can result in foreign
objects being blown into the eyes, which
can result in severe eye damage.
READ AND SAVE THESE INSTRUCTIONS
Motor Specifications
and
Electrical Requirements
110-120 Volt, 60 Hz. Air Blower
Information
WARNING: To reduce the risk of
electric shock:
• Connect
to an outlet with a GFCl
protected device.
• Do not use an extension cord with
this fan.
The plug supplied on your Air Blower may
not fit into the outlet you are planning to
use. Your local electrical code may require
slightly
different
power
cord
plug
connections.
If these
differences
exist
refer to and make the proper adjustments
per your local code before your toot is
plugged in and turned on.
In
the
event
of
a
malfunction
or
breakdown,
grounding
provides a path of
least
resistance
for electric
current
to
reduce the risk of electric shock. This Air
Blower is equipped with an electric cord
having an equipment-grounding
conductor
and a grounding
plug. The plug must be
plugged
into a matching
outlet
that
is
properly
installed
and
grounded
in
accordance
with
all
local
codes
and
ordinances.
Do not modify the plug provided. If it wilt
not fit the outlet, have the proper outlet
installed by a qualified electrician.
If power cord is worn or cut, or damaged in
any way, have it replaced immediately by
a qualified electrician.