Descargar Imprimir esta página

Steinberg Systems SBS-PS-500N Manual De Instrucciones página 13

Bácula de plataforma

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 37
Press UNIT to change the calibration weight and press TARE to confirm the selected calibration weight.
Place the scale on the platform as shown on the display. The scale will show PASS if the calibration is
successful.
If the load is not stable or the calibration is interrupted, the scale will display "Err" and switch off
automatically after one minute.
If the calibration fails, the scale will display "Err" and switch off automatically.
You can press ON/OFF to stop the calibration.
3.4.
Cleaning and maintenance
a)
Always unplug the device before cleaning or putting it away.
b)
Use only non-corrosive cleaners to clean the surface.
c)
After cleaning the device, all parts should be dried completely before using it again.
d)
Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight.
e)
Do not spray the device with a water jet or submerge it in water.
f)
The device must be regularly inspected to check its technical efficiency and spot any damage.
g)
Do not leave the battery in the device if it will not be used for a longer period of time.
h)
Use a soft, damp cloth for cleaning.
i)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
j)
Do not clean the device with an acidic substance, agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage the device.
SAFE REMOVAL OF BATTERIES AND RECHARGEABLE BATTERIES:
Remove used batteries from the device using the same procedure by which you installed them.
Recycle batteries with the appropriate organisation or company.
DISPOSING OF USED DEVICES:
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device
recycling and collection point. Check the symbol on the product, instruction manual and packaging. The
plastics used to construct the device can be recycled in accordance with their markings. By choosing to
recycle you are making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.

Publicidad

loading