Water Testing - BOJ PC-1000-5 Manual De Uso

1. Inspect and install silicone gasket and float valve.
2. Install the water receiver.
3. Secure the Power Cord.


Water Testing

Please perform a water test on Electric Pressure Cooker before using to verify its function.
Please follow the steps below to complete this test.
1. Place the stainless steel inner pot into the Electric Pressure Cooker base. Turn on the
power.
2. Pour 3 cups of water into the stainless steel inner pot by using the attached measuring
cup.
3. Lock lid in place and turn steam hole handle to Sealing.
1. ADD 3 CUPS WATER
4. Select Steam and press Start.
5. Rotate the button, adjust the time to 2 minutes, and press Start again.
6. At this time, the display screen will show
preheating state. Steam will be released until the float is fully raised. When pressure
is reached, the timer begins to count down. After the program is complete, Electric
Pressure Cooker beeps and automatically switches to the keep warm.
ADJUST TIME
(ROTATE THE KNOB, ADJUST TIME TO 2 MINUTES)

2. LOCK LID

3. TURN TO SEALING
the, and the graph will show the
AFTER CYCLE COMPLETES, TURN TO
VENTING FOR QUICK RELEASE
- 7 -
English

4. SELECT STEAM