Publicidad
Idiomas disponibles
Idiomas disponibles
AVAILABLE
ACCESSORIES
Use only accessories recommended for this drill press.
Follow instructions that accompany accessories. Use of
improper accessories may cause hazards.
T!Ylv/_,1 t,:l_ll _ , [ _
Visit your Sears Hardware Department or see the Sears
Power and Hand Tool Catalog for the following
accessories:
Drill bits
•
Hold-Down and Guide
Drill Press Vises
•
Clamping Kit
UNPACKING
AND CHECKING
CONTENTS
If any part is missing or damaged, do not plug the drill
press in until the missing or damaged part is replaced,
and assembly is complete.
Carefully unpack the drill press and all its parts, and
compare against the illustration below.
To protect the drill press from moisture, a protective
coating has been applied to the machined surfaces.
Remove this coating with a soft cloth moistened with
kerosene or WD-40.
Use only accessories designed for this drill press to
avoid injury from thrown broken parts or workpieces.
Do not use any accessory unless you have completely
read the instruction or owner's manual for that accessory.
To avoid fire or toxic reaction, never use gasoline,
naphtha, acetone, lacquer thinner or similar highly
volatile solvents to clean the drill press.
TABLE OF LOOSE PARTS
ITEM
DESCRIPTION
QUANTITY
A.
Head assembly
B.
Base
C.
Table
D.
Column assembly
E.
Collar
F.
Rack
Loose parts bag:
G.
Feed handles
H.
Worm gear
I.
Crank handle
J.
Lock handle
K.
Hex bolts
L.
Fence assembly
M.
Triangle knobs
N.
Wing nuts
O.
Washers
P.
Hex keys
1
1
1
1
1
1
3
1
1
1
4
1
2
2
4
2
Box:
Q.
Chuck key
R.
Chuck
Publicidad
