Costway ES10262DE Manual Del Usuario página 9

Preparations and inspection while
beginning the operation
Confirm the tank is installed in position.
The dehumidifier can't operate if the water in the tank is full or isn't
installed well.
1. How to move the water tank.
Hold the sides of the water tank and pull the tank out.
2. Method to empty out the water tank.
1. Pull out the water tank from the dehumidifier.
2. Incline the water tank according to the indication direction and
empty out the water slowly.
3. Install the water tank back into the dehumidifier.
Remark
After the dehumidifier is running,
the water tank may have water,
and when the water is full, the
dehumidifier will run
automatically and the indicator
light will be on.
16
Maintenance notices
Warning
Please don't plug in with wet
hands to avoid electric shock.
Notice
Please cut off the power supply
before daily cleaning and
maintenance.
Don't dismantle the floater from
the water tank.
If the machine unit is not in use for extended periods:
1. Empty out the water in the tank, wipe up the water tank and
install it back.
2. Clean the filter.
3. Place the machine unit upright and avoid the direct sunlight.
Requirement
Please place the machine unit upright to avoid misoperation and
unusual sound.
Machine body
Wipe up the dehumidifier with wet cloth (put it into the water and
wring it out). Don't clean the control unit with wet cloth.
Don't clean the machine unit with gasoline, thinner or liquid
detergent to avoid deformation and fission of the machine unit.
The cloth contains chemicals may change the color of the
machine unit.
Prohibit wet hand
Pull off plug
Prohibit
17