Publicidad
Idiomas disponibles
Idiomas disponibles
Exemption From Liability
We cannot guarantee that the information on the technical properties and
that contained in this document is correct. The product and, where applica-
ble, its accessories, described in this document are subject to constant im-
provement and further development. For this reason, we reserve the right to
modify components, accessories, technical specifications and related docu-
mentation of the product at any time without notification.
Intended Use
This laminator has been conceived for use processing hot and cold laminat-
ing foil. It is possible to laminate pictures, maps, documents, paper etc. up to
a total thickness of 0.5 mm. Any other use is considered unintended use.
Unauthorised modifications or reconstructions are not permitted.
Safety note:
The power socket must be located close to the equipment and be easily ac-
cessible. This enables the equipment to be disconnected from the power
supply quickly in an emergency.
Features
Protection and refinement of your documents.
Laminate photographs, documents, graphics, identity cards etc. up to A3
size. The unit operates using 2 heating rollers, has a quick warm-up phase
and laminates without a carrier.
2 LEDs show the operating states "Ready" and "Power"
Automatic switch-off in the event of overheating
High quality heating system prevents smudging and blistering
Warm-up phase only about 3 - 5 minutes
Time for cooling down to room temperature: approx. 15 minutes.
Foil thickness, minimum m and maximum 125 m
Laminating system:
Working width:
Laminating temperature (COLD),
(HOT)
Maximum laminating width:
Warm up period:
Maximum foil thickness:
Laminating speed:
Power supply:
Hot roller technology
mm (A)
35 °C,
97 - 105 °C
mm
3 - 5 minutes
PLFURQ
0 mm/min
220 - 240 Volt, 50 Hz
13
Publicidad
