Publicidad
Idiomas disponibles
Idiomas disponibles
For the same reason, do not accumulate materials of any kind in its proximity,
do not place objects or containers for liquids of any kind on the charger.
If there are filters (see fig. A page. 2), check them regularly, and when
necessary, remove them from the charger for cleaning with water
or compressed air. Incomplete cleaning of the filters causes failure to cool
the charger and consequent malfunction.
The Q-series chargers have the ability to charge all types of batteries
commonly present on the market, depending on their construction technology
and user needs. Each Polar Q-Series charger model can be customized by
setting the charging curve according to the user's needs, modifying four
parameters: nominal battery voltage, charging current, battery type and
end-of-charge mode. This is done using the Program Shooter (code 222900).
To find out how a battery charger is set, see the chapter "Operations
- commands and displays".
Depending on the type of battery set, the charge curve will reach different
charge voltages. Refer to the following list to make sure the charger is set
correctly for the battery you are charging:
WET: Free lead acid - End of charge voltage: 2.4V / element
WET DEEP: Free lead acid with deep charge end of charge: 2.65V / element
GEL: Lead-acid with electrolyte in gel form
End of charge voltage: 2.35V / element
AGM1: Lead-acid with electrolyte absorbed by glass microfiber
End of charge voltage: 2.38V / element
AGM2: Lead- acid with electrolyte absorbed by glass microfiber
End of charge voltage: 2.45V / element
The charging process is divided into 6 phases, see fig.B pag. 5:
a
1 - Analysis. When the battery is connected, the charger performs an analysis.
2 - Bulk. Constant current initial charge phase.
3 - Absorption + Final. Constant voltage charging phase in which the current
absorbed by the battery drops.
4 - Conditioning + Final. Optional deep charge stage. (WET DEEP only)
a
The charger can finish charging in two different ways depending on the setting:
5 - Floating: Final charge phase in buffer, the charger acts as a charge
maintainer for the entire time it is connected to the battery, bringing the voltage
to 2.25V / element to avoid self-discharge over time.
6 - Equalization: Final charge phase in equalization, with additional duration
a
of 13 hours that balances the charge of the elements and helps fight sulfation
and the general decay of the battery.
CHARGE CURVES
16.
Publicidad
