Shark Detect Pro IW1000 Serie Guia De Inicio Rapido página 5

Please be sure to read and save the warnings on other side prior to using your unit.
QUICK START GUIDE
How to set up the IW1000 Series
Shark Cordless Detect Pro Auto-Empty System.
®
ASSEMBLY
1. Slide the Wand onto the neck of the Floor Nozzle until it clicks into place.
2. Align the Hand Vacuum nozzle opening with the top of the wand and slide
it on until it clicks into place.
For proper operation, ensure all components are completely connected and
clicked into place.
Handheld
Vacuum
2.
(Click) CHARGING BATTERY
IN HANDHELD VACUUM
To charge the battery inside the
handheld vacuum, connect the
charger to an electrical outlet,
then insert the charger plug into
the port below the handle on the
Flex Wand
handheld vacuum.
CHARGING BATTERY
1.
OUT OF THE VACUUM
(Click)
Press and hold the Battery Release
Button, then pull out the battery.
Plug the charger into the charging
port on the battery. To reinstall the
battery, insert it into the slot in the
back of the handheld vacuum.
Floor Nozzle
NOTE: The main unit comes with a partial charge. For maximum runtime, charge fully before
first use (approximately 4 hours). Leaving the unit plugged in will not damage battery life.
ESSENTIAL MAINTENANCE
CLEANING THE FILTERS
Regularly rinse and replace the filters to maintain your vacuum's suction
power. To clean filters, rinse them with water only. Allow all filters to air-dry
completely for up to 48 hours before reinstalling to prevent liquid from being
drawn into electric parts. Clean the pre-motor filters at least once a month and
post-motor filter at least once a year. Tap off loose dirt between washes when
needed. More frequent cleaning may sometimes be necessary with heavy use.
Please refer to the Owner's Guide for more information on filter maintenance.
1. To access the filter,
rotate the filter
cover on the hand-
held vacuum to the
unlocked position.
2. Pull off the filter
Post- cover and lift out
motor
the filter.
Filter
3. Reinsert the filter,
Squeeze both release buttons
then replace the
to remove dust cup for filter
cover and rotate it
maintenance.
back to the locked
Note: Dust cup must be open
position.
to remove.
IMPORTANT: DO NOT use soap when cleaning the filters. Use water only. The vacuum will not have
suction if the post-motor filter is not installed. Ensure that all filters are installed before using.
SETTINGS
POWER ON/OFF
MODE SELECTION
Press the On/Off button on the To toggle between ECO, AUTO, and
handle to turn on power. To turn off BOOST modes, press the mode
power, press the button again. selection button.
MODES EXPLAINED
AUTO MODE
In this mode, all of the following
technology is automatically
activated:
DirtDetect: Identifies dirtier
high-traffic areas and
automatically boosts suction
power to pull in hidden dirt.
FloorDetect: Brush-roll
responds to surface changes
and automatically adjusts to
LED INDICATOR
optimize your clean.
EdgeDetect: Dynamically
When the LED indicator light
detects edges and corners and
is blue, this means no heavy
maximises suction and power
dirt levels are detected and
to remove stubborn dirt.
suction power is normal. When
the vacuum senses heavy LightDetect: Senses low-light
debris, the light will turn red,
situations and automatically
and suction power will increase illuminates dark areas to help
for more cleaning power. you spot debris.
When the indicator light turns
amber, debris is being removed.
Continue cleaning until the
indicator turns blue again.
ECO mode: Vacuum runs on the lowest power setting to preserve
battery life. Auto Mode technology is NOT activated.
BOOST mode: Vacuum runs at maximum power for the highest
possible suction level. Auto Mode technology is NOT activated.
CLEANING THE SENSORS
Make sure to clean the sensors
Fig. 1
regularly, as hair and other
debris may build up and obstruct
them. If the sensors are partially
Air path
obstructed, Auto mode will not
function as expected.
To clean the sensors:
Dust cup
1. Turn off power and remove the
DIRTDETECT SENSOR
floor nozzle and wand.
2. Locate the DirtDetect Sensor in
Fig. 2
the nozzle of the hand vac (Fig.
1), the LightDetect Sensor on the
top of the nozzle (Fig. 2),
and the EdgeDetect sensor on
the side of the nozzle (Fig. 3).
3. Gently wipe the sensors with a
CLEANING THE LIGHTDETECT SENSOR
microfibre cloth and remove all
hair and debris.
4. Reattach the floor nozzle and
wand to the rest of the unit and
turn on power. Verify that the
unit is functioning normally.
Fig. 3
CLEANING THE EDGEDETECT SENSOR
FIVE (5) YEAR LIMITED GUARANTEE
When a consumer buys a product in Europe, they get the benefit of legal rights relating to the quality of the product (your "statutory rights"). You can enforce
these rights against your retailer. However, at Shark® we are so confident about the quality of our products that we give the original product owner an additional
manufacturer's guarantee of up to five years (2 year standard plus 3 on registration). These terms and conditions relate to our manufacturer's guarantee only -
your statutory rights are unaffected.
The conditions below describe the prerequisites and scope of our guarantee. They do not affect your statutory rights or the obligations of your retailer and your
contract with them.
The Lithium ION power pack is not covered by the 5 year guarantee (see battery guarantee below)
Shark® Guarantees
A household appliance like a vacuum cleaner constitutes a sizeable investment. Your new machine needs to work properly for as long as possible. The guarantee
it comes with is an important consideration - and reflects how much confidence the manufacturer has in its product and manufacturing quality.
Every Shark® machine comes with a free parts and labour guarantee. You'll find online support at www.sharkclean.eu
How do I register my extended Shark® guarantee?
You can register your guarantee online within 28 days of purchase. To save time, you'll need the following information about your machine:
• Date you purchased the machine (receipt or delivery note)
To register online, please visit www.sharkclean.co.uk/register-guarantee. Products purchased directly from Shark® are automatically registered.
IMPORTANT
• Both the 2 years and the extended 3 years guarantee will only cover your product from the date of purchase.
• Please keep your receipt at all times. Should you need to use your guarantee we will need your receipt to verify the information you have supplied to us is
correct. The inability to produce a valid receipt may invalidate your guarantee.
What are the benefits of registering my free Shark® guarantee?
When you register your guarantee we'll have your details to hand if we ever need to get in touch. If you further agree to receive communications from us, you can
also receive tips and advice on how to get the best out of your Shark® vacuum and hear the latest news about new Shark® technology and launches.
If you register your guarantee online, you'll get instant confirmation that we've received your details.
How long are new Shark® machines guaranteed for?
Our confidence in our design and quality control means that your new Shark® vacuum cleaner is guaranteed for a total of up to five years (2 years plus 3 years on
registration).
What is covered by the free Shark® guarantee?
Repair or replacement (at Shark's discretion) of your Shark® machine, including all parts and labour. A Shark® guarantee is in addition to your legal rights as a
consumer.
What is not covered by the free Shark® guarantee?
1. Blockages - for details of how to unblock your vacuum cleaner, please refer to the instructions.
2. Normal wear and tear such as brush bar, fuse, belt, batteries, hose etc.
3. Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of the vacuum cleaner which is not in accordance
with the Shark® instructions supplied with your machine.
4. Use of the vacuum cleaner for anything other than normal domestic household purposes.
5. Use of parts not assembled or installed in accordance with the operating instructions.
6. Use of parts and accessories which are not Shark® Genuine Components.
7. Faulty installation (except where installed by Shark®).
8. Repairs or alterations carried out by parties other than Shark® or its agents.
9. The Lithium ION power pack battery. Please see below for battery guarantee.
What happens when my guarantee runs out?
Shark® does not design products to last for a limited time. We do appreciate that there may be a desire for our customers to want to repair their vacuum cleaners
after the guarantee has lapsed. In this case please contact our Freephone customer service help line.
Where can I buy genuine Shark® spares and accessories?
Shark® spares and accessories are developed by the same engineers who developed your Shark® vacuum.
You'll find a full range of Shark® spares, replacement parts and accessories for all Shark® machines at www.sharkclean.eu. Please remember that damage caused
by use of non-Shark® spares is not covered under your guarantee.
TWO (2) YEAR LIMITED BATTERY GUARANTEE
When a consumer buys a product in the UK, they get the benefit of legal rights relating to the quality of the product (your "statutory rights"). You can enforce
these rights against your retailer. However, at Shark® we are so confident about the quality of our products that we give you an additional manufacturer's
guarantee of two years for the battery. These terms and conditions relate to our manufacturer's guarantee only - your statutory rights are unaffected.
Every Shark® machine comes with a free parts and labour guarantee. You'll find online support at www.sharkclean.eu/register-guarantee
IMPORTANT
• The manufacturer's guarantee covers your battery for 2 years starting on the date of delivery.
• Please keep your receipt at all times. Should you need to use your guarantee we will need your receipt to verify the information you have supplied to us is
correct. The inability to produce a valid receipt may invalidate your guarantee.
How long are new Shark® batteries guaranteed for?
Our confidence in our design and quality control means that your new Shark® vacuum cleaner battery is guaranteed for a total of two years.
What is covered by the free Shark® guarantee?
Repair or replacement of your Shark® machine (at Shark's discretion to decide whether to replace or repair) including all parts and labour. A Shark® guarantee is
in addition to your legal rights as a consumer.
What is not covered by the free Shark® guarantee?
1. Normal wear and tear of parts which require regular maintenance and/or replacement to ensure the proper
functioning of your unit.
2. Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of
the vacuum cleaner which is not in accordance with the Shark® Instructions supplied with your machine.
3. Use of the battery for anything other than normal domestic household purposes.
4. Use of parts not assembled or installed in accordance with the instructions.
5. Use of parts and accessories which are not Shark® spares.
6. Faulty installation (except where installed by Shark®).
Where can I buy genuine Shark® spares and accessories?
Shark® spares and accessories are developed by the same engineers who developed your Shark® vacuum.
You'll find a full range of Shark® spares, replacement parts and accessories for all Shark® machines at www.Sharkclean.eu. Please remember that damage caused
by use of non-Shark® spares is not covered under guarantee.