Stihl FG 2 Manual De Instrucciones página 20

English
2
Set the filing angle – to sharpen the
N
left-hand row of cutters, turn the
guide to the right (clockwise).
Tighten down the knurled nut.
N
1
3
Position the master cutter (3) below
N
the center of the knurled nut (1).
18
Aligning the filing frame
1
Position the round file (1) between
N
the side plate and depth gauge of
the master cutter by swinging and
lifting the filing frame.
2
Turn the adjusting screw (2)
N
(counterclockwise to lower file –
clockwise to raise file) until about
1/4 of the file diameter projects
above the top plate.
3
Turn the knurled nut (3) until the
N
stop (4) butts against the back of the
cutter to be sharpened (master
cutter).
4
FG 2