TIPS FOR GREAT RESULTS
• Cut solid foods into small pieces for
easier blending or chopping.
• The Hand Blender is equipped with
thermal protection from high operating
temperatures. Should the Hand Blender
suddenly stop during use, unplug it and
allow 10 minutes to automatically reset.
• To avoid splashing, insert the Hand
Blender into the mixture before pressing
the power button, and release the power
button before pulling the Hand Blender
out of the mixture.
• When blending in a saucepan on a
cooktop, remove the pan from the
heating element to protect the Hand
Blender from overheating.
CARE AND CLEANING
Always clean the appliance and its
attachments after use and before storing.
1. Unplug Hand Blender before cleaning.
2. Remove the attachments by twisting (see
"Operating Your Hand Blender" section)
3. Wipe the motor body with a damp cloth.
Mild dish soap may be used, but do not
use abrasive cleansers.
4. Wipe power cord with warm, sudsy
cloth; then wipe clean with damp cloth.
Dry with soft cloth.
NOTE: Do not immerse the motor body
in washing solution, rinse water
or sanitizing solution.
14
• For best blending, hold the Hand Blender
at an angle and gently move up and down
within the container. Do not pound down
on the mixture with the Hand Blender.
• To prevent overflow, allow room in the
container for the mixture to rise when
using the Hand Blender.
• Be sure the cord of the Hand Blender is
not extending over a hot heating element.
• Do not let the Hand Blender sit in a hot
pan on the cooktop while not in use.
• Remove hard items, such as fruit pits
or bones, from the mixture before
blending or chopping to help prevent
damage to the blades.
Hand Blender Attachments
Wash blending attachments in hot, soapy
water, or in the dishwasher. Dry thoroughly.