Costway TQ10144 Manual Del Usuario página 8

PRODUCT ASSEMBLY
Turn over the body so that its body faces up.
P
Fix the steering lever.
● Insert the steering lever into the body hole.
● Insert φ10 washer on steering lever.
● After the steering lever is installed in place, insert the cotter pin to
bend and fix it.
P
N
Fix the rear axle.
● Insert the rear axle into the car.
O
Fix the gear box (L/R).
● Put the gear box into the rear axle, and clip the motor and motor wire
into the body slot. (Note: the gear box is distinguished from the left
and right)
14
1
O
N
Put the gaskets, front wheel, gaskets and nut into the front axle in turn.
Fix the nut with the M10 wrench and then attach the front wheel cover to the
wheel.
Place the rear wheel,gaskets, and nut on the rear axle in turn.
Fix the nut with the M10 wrench and then attach the rear wheel cover to the
wheel.
Turn over the body so that its body faces up.
L
Fix the chimney.
● Clip chimney into the body slot.
J H I
Put the bucket arm, gaskets and nut into the bucket axle in turn.
Fix the nut with the M10 wrench and then attach the bucket arm cover
to the bucket arm. (Note: the bucket arm is divided into left and right, as
shown in the figure)
Note: When installing the front bucket arms, you need to tap them into
place.
15