Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
2. Medium
3. High
Recommendations for gear changes
To improve the range of the electric bike, we recommend changing the gear ratio according to
the speed. A lower gear is best for low-speed off-roading and travelling. At higher speeds it is
best to choose a higher gear. Releasing the pressure on the pedals during shifting will allow
smooth assistance and better autonomy.
Charging the battery
Only use the original charger supplied to charge the electric bicycle. To start charging, remove
the battery, insert the charger into the socket on the side of the battery and plug it into a
compatible power source. The battery will fully charge in 4-6 hours.
5. CLEANING AND MAINTENANCE
-
It is recommended to use a damp cotton cloth or sponge instead of a hose or water jet.
-
It is recommended to clean the electric bike after each use. However, you can wash it
weekly. This will help to extend the lifespan of the electric bike.
-
Use soaps and care products for bicycles that do not attack plastics and seals, which can
be found in specialised shops. You can also use a soap solution or liquid detergent. Do not
use aggressive products or strong degreasing agents.
-
You can dry clean the electric bike with a cotton cloth or microfibre cloth to prevent
corrosion.
-
The battery bracket is designed to allow water to drain off more quickly and the battery
contacts to dry easily. For this to happen, the bracket area and the plug must be kept
clean. The battery contacts are provided with a coating that protects the surface against
corrosion and wear.
Maintenance
Keep tyre pressure at least 2.5 bar. Maintain tyre pressure to avoid punctures. If you notice
any irregularities, take the electric bicycle to a mechanic.
Bike chain maintenance
-
Lubricate the chain regularly to avoid annoying chain noises and other problems when
changing gears. Lubricate the chain every 100-200 km or when the chain is dry or dirty.
Use a specific lubricant for bicycle chains, preferably one with a wax or Teflon base. Apply
the lubricant to the inside of the chain while turning the pedals backwards. Remember to
clean the chain before applying the lubricant for best results.
-
When greasing the chain, make sure that the brake discs are not soiled, and that the
78
MTB
Publicidad
