Publicidad
Idiomas disponibles
Idiomas disponibles
7
Reading the LED display
The harvester is equipped with a handy LED to determine the battery charge level.
LED with a steady green light: battery charged from 200% to 50%
LED with a steady red light: battery charge 49% to 25%
LED with a flashing red light: battery charged from 24% to exhaustion
8
Cleaning and maintenance must be carried out with the harvester switched off and
the battery disconnected.
Components of the tool box
Tool
Allen wrench 4 mm
140
Art. 624
Harvester Magma E-1350 21 V
Usage
Cleaning and maintenance
Function
Unscrew screws and bolts of the machine body
Art. 624
Harvester Magma E-1350 21 V
Cleaning and maintenance
Cleaning
When cleaning your harvester do not spray the harvester with water or immerse it in water.
1.
Do not spray the equipment with water or immerse it in water, otherwise it may cause
electric shock.
2.
Keep the handle of the ventilation tank, engine room and equipment clean.
3.
Clean with a damp cloth or brush.
4.
Do not use detergents.
5.
Please clean the rods carefully after each use.
Disassembly and assembly maintenance steps
General maintenance, cleaning and replacement of the rods require limited
disassembly and assembly.
1.
Remove the battery and place the harvester on a level surface to facilitate operations.
2.
Loosen the rod lock as much as necessary using the Allen wrench provided, so that the
rods can be conveniently removed from the rod head
3.
Remove the rods that need to be replaced from the locking seat and the anti-breaking
4.
Place the new rods in their seat, taking care to insert them through the anti-breaking.
Make sure that the rods are pushed in as far as they will go
5.
Re-attach the rod lock with the Allen wrench provided, taking care not to force it too hard
to avoid damaging the rods.
For further information about the product, please contact info@stockergarden.com
8
141
Publicidad
