Stop the fan and disconnect from power, wait at least 2 minutes before opening the
water tank. Some water will still be left in the pipes and will flow back to the tank.
There are two ways to refill water. Either you can (1.) pull the water tank halfway out
and refill directly, or you can (2.) separate the water tank completely by rotating the
plastic thumb screw in the bottom of the water tank, and thus removing the water
pump.
1. Use the small plastic handle to loosen the water tank.
2. Pull the water tank halfway out. You can refill with water now if you want and skip to
step 6.
When filling with water, check that water is lower then "max" and higher than "min".
To remove the water tank completely, please continue with step 3.
3. Rotate the plastic thumb screw in the bottom of the water tank. Separate and lift the
water pump module.
25