JVC KD-SX38MBT Manual De Instrucciones página 26

Audio Settings
Speaker output settings
[SPK/PRE OUT]
(Applicable only if [X ' OVER TYPE ] is set to [2-WAY]) (page 19)
Select the output setting for the speakers [SPK/PRE OUT], based on the speaker
connection method.
Connection via lineout terminals
For connections through an external amplifier (Page 32)
Setting on
[SPK/PRE OUT]
[REAR/REAR] Rear speakers output
[REAR/SUB.W] (default) Subwoofer output
[SUB.W/SUB.W] Subwoofer output
20 ENGLISH
KD-SX38MBT_K_B5A-4237-00_EN_1st Draft.indd 20 KD-SX38MBT_K_B5A-4237-00_EN_1st Draft.indd 20
Audio signal through lineout terminal
REAR/SW
Connection via speaker leads
You can also connect the speakers without using an external amplifier
but still being able to enjoy the subwoofer output with these settings.
(Page 31)
Audio signal through rear speaker lead
Setting on
[SPK/PRE OUT]
L (left)
[REAR/REAR] Rear speakers output
[REAR/SUB.W] Rear speakers output
[SUB.W/SUB.W] Subwoofer output
If [SUB.W/SUB.W] is selected:
– [120HZ] is selected in [SUBWOOFER LPF] and [THROUGH] is not available.
(Page 22)
– [POSITION R02] is selected in [FADER] and selectable range is [POSITION R15] to
[POSITION 00]. (Page 19)
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
R (right)
Rear speakers output
Rear speakers output
(Mute)
27/4/2022 12:01:10 PM 27/4/2022 12:01:10 PM