Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE
YOU BEGIN TO WAX, BUFF AND POLISH
YOUR CAR:
1. Wash,
clean and dry your vehicle.
2. Remove
all road tar, excess grease
spots and bug stains with a
general-purpose
cleaner.
3. Make sure the work area is dry.
ATTACHING
THE WAX APPLICATOR
BONNETTOTHE
FOAM
PAD
(See Figure 2)
WARNING:
When changing
accessories,
BE SURE that the switch is in the (OFF)
position
and the cord is unplugged.
1. P_ace wax applicator
bonnet
on foam pad
as shown in Fig. 2.
2. ALWAYS make sure that the elastic
strip
on the bottom
of the bonnet
is securely
tucked
on the underside
of the foam pad.
APPLYING
WAX TO BONNET
(See Figures
3 and 4)
IMPORTANT:
DO NOT APPLY WAX
DIRECTLY
ON CARt
APPLYING
PASTE WAX TO BONNET
(See Figure
3)
1. Spread a heaping teaspoon of wax
evenly over entire surface
of applicator
bonnet
using a putty knife or any other
fiat obiect (See Fig. 3).
Fig. 3
APPLYING LIQUID WAXTO BONNET
(See Figure 4)
1. Apply three swirls of wax over applicator
bonnet (See Fig. 4).
2. This should be enough to cover 1/4 of
car
surface.
3. For the second and third applications,
only use about one half as much as on
first application. The bonnet will not
absorb as much wax on these
applications.
Fig. 4
7
Publicidad
