Windgoo B20 PRO Manual Del Usuario página 6

Function Introduction:
1. Charging: connect the charger to charge, with AC plug first and DC plug next.
When the power bar on bike handle shows full and the charger indicator turns green
from red, it indicates full power.
2. Switch on /off: Press and hold the button on the left handle for 3 seconds to switch
on. The dash board lights up after booting. Short press for 1 second to switch off. The
dash board light will be off after turning off the power.
3. After booting, the dash board lights up and indicate the amount of electricity,
4. Front light and rear light: press the button on the right handle 3 seconds then
release, turn up the lights. Press the button on the right handle 1 seconds to turn off
the light.
5. Brake light: Back light lights up when braking. It could not accelerate before the
brake is fully loosened.
6. Riding activates electric pedal assist mode. Riding speed gears can be adjusted
via APP.
7. Driving mode: The bike has electric pedal assist mode.
Riding activates electric pedal assist mode. Riding speed gears can be adjusted via
APP.
Without power, the bike will work with pedal at chains driving mode.
06