Publicidad
Idiomas disponibles
Idiomas disponibles
5. USE
The appliance can only be controlled by remote control. The commands are given via radio, therefore it is
not necessary to have a particular orientation when pressing the buttons.
1
Turn off the fan
2
Command transmission LED
3
Light on/off
4
Rotation speed selector (1=slow, 5=fast)
Clockwise or counterclockwise rotation
5
selector
6
Automatic shutdown at 1, 4 or 8 hours
7
Batteries (2 x AAA alkaline mini-stylus)
Automatic shutdown causes the fan to stop rotating 1, 4 or 8 hours after pressing the corresponding button
on the remote control. To deactivate a previously entered automatic switch-off setting, stop the rotation
with key 1 and restart it with one of the speed keys.
6. CARE AND MAINTENANCE
The product does not require maintenance, apart from the periodic replacement of the remote control
batteries, which in any case must always be removed in the event of prolonged inactivity. For cleaning, turn
off the electricity supply from the switch on the panel, wipe the surfaces with a damp cloth, avoid
aggressive or abrasive detergents, wait for it to dry completely and reconnect the power supply from the
panel.
7. PROBLEMS AND SOLUTIONS
Problem
Neither the fan nor the light turns
on, but the LED on the remote
lights up when pressing the keys
Neither the fan nor the light nor
the LED on the remote control
turns on when pressing the
buttons
The rotation of the fan causes
oscillations and/or vibrations
and/or noise
If problems other than those indicated in the previous table occur, have the installation and connections
checked by qualified technical personnel.
8. TECHNICAL DATA
Supply voltage:
Maximum power in ventilation:
Maximum lighting power:
Blade rotation diameter:
Weight:
Remote control batteries:
Possible cause
There is a switch on the power
line in the open position
The remote control batteries are
flat
The blades are misaligned
230 V AC 50 Hz
45 Watt
24 Watt
132,5 cm
4 kg
2 x AAA alkaline ("mini stylus")
Probable solution
Press the switch to bring it to
the closed position
Replace the remote control
batteries
Carry out the dynamic
balancing of the blades as
indicated in chapter 4
Publicidad
