GE AEE18 Manual Del Propietario Y Instrucciones De Instalación página 12

Window Installation Instructions
REMOVE THE AIR CONDITIONER
3
FROM THE CASE
Remove the locking screw and locking
E
bracket from the lower frame. Save to
reinstall later.
Remove the ground screw and save to
F
reinstall later.
Slide the air conditioner from the case by
G
gripping the base pan handle and pulling
forward while bracing the case.
PREPARE THE WINDOW
4
Cut the window sash seal to the proper
length. Peel off the backing and attach the
seal to the underside of the window sash.
(cont.)
Remove the ground screw
and save to reinstall later
PREPARE THE CASE
5
Install the top mounting rail with 4 type B
A
screws from the inside of the case.
Press firmly to drive the screws into the
gasket and through the top mounting rail.
Top mounting rail
Insert the frames for the accordion panels
B
into the top mounting rail and the bottom
frame guides. Attach the accordion panels
to the side of the case using 3 type A screws
on each side.
NOTE: When attaching the accordion panels,
make sure to only screw the inner panels
to the case sides.
Top mounting rail
Type A
screws
Bottom mounting rail
12
BACK