Descargar Imprimir esta página

Weber Genesis 320 Guia Del Propietario página 25

Ocultar thumbs Ver también para Genesis 320:

Publicidad

Idiomas disponibles

Idiomas disponibles

Burner Tube Removal
To remove burner tube(s):
A)
Remove igniter wire(s) from igniter clip(s) (7).
B)
Remove screw that holds burner tube to the cookbox using a flathead screwdriver
(8).
C)
Pull burner tube assembly
(this includes igniter) up and out of cookbox (9).
Note. 310/320 units will have an additional
grounding
wire attached to the center
burner tube (10).
Burner
Tube
Cleaning
To clean the burner tube(s):
A)
Look inside each burner with a flashlight
(11).
B)
Clean the inside of the burners with a wire (12) (a straightened-out
coat hanger will
work).
C)
Check and clean the air shutter opening at the ends of the burners. Check and
clean the valve orifices at the base of the valves. Use a steel bristle brush to clean
outside of burners (13).This
is to make sure all the burner ports are fully open.
z_ CAUTION:
Do not enlarge the burner ports when cleaning.
Burner
Tube
Reinstallation
To reinstall burner tubes:
A)
Slide burner tube and igniter wire through hole in cookbox (14). Refer to
"ELECTRONIC
IGNITION
SYSTEM OPERATIONS"
for proper burner position.
B)
Align burner tube with valve.
z_ CAUTION: The burner openings
(15) must be positioned
properly over the valve orifices (16).
C)
Re-install screw that holds the burner tube to the cookbox using a flathead
screwdriver.
Burner tube may seem loose (17), when screw is snug. This is normal.
D)
Route wires back through igniter clips. Refer back to figure (7).
CAUTION: All wires must be properly routed through
wire
clips.
E)
Attach wires to module, following the numerical/color
coding (18). Refer to
"ELECTRONIC
IGNITION
SYSTEM OPERATIONS"
for proper attachment
of wires.
z_ WARNING:
After reinstalling
the gas lines, they should
be
leak checked with a soap and water solution
before using
the barbecue.
(Refer to "CHECK FOR GAS LEAKS".)
z_ WARNING:
Make sure that all parts are assembled
and
hardware is fully tightened
before operating
the grill. Your
actions,
if you fail to follow
this Product Warning,
may
cause a fire, an explosion,
or structural failure resulting
in serious personal injury or death as well as damage to
property.
,_i_
_i_
_i__i_i!_
_I_I_I _!i_!_i_i
_!_i_!!_iiiiiiiiiii
.......
_i_ii_i_!i_iii!ii!ii!_i;!_!i_i_i_i_i_ii!!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
_=, ?!;i;i!!_;iiiiiiiiiiiii!iiiii;iiiii
ii
25

Publicidad

loading

Este manual también es adecuado para:

Genesis 330