Publicidad
Idiomas disponibles
Idiomas disponibles
1 - Function switch
2 - Support base.
Technical data indicated on the appliance.
SUPPORT BASE ASSEMBLY.
Before performing any assembly operation, make certain that the
appliance is switched off and disconnected from the power outlet.
Assemble the heating body to the support base, passing the cord through
the appropriate slot.
Turn the appliance over, screw on the screws with plastic heads to fix the
heating body to the base, tightening them correctly.
USER INSTRUCTIONS.
To turn on the appliance, insert the plug into the power outlet.
Turn the knob clockwise to select the power: 450W+oscillation /
900W+oscillation; turn underclockwise to select the desired power
without oscillation.The appliance is equipped with an automatic turn-off
system in case it falls over accidentally.
Before connecting or disconnecting the appliance, make certain that all
the switches are in the off position.
Before replacing the appliance in its packaging, check that it has cooled
sufficiently.
Disconnect the plug from the socket and let the appliance cool down well
before cleaning it.
In order to clean the appliance, use a soft or slight damp cloth.
Never use abrasives or chemical solvents.
Do not use very wet substances, liquids or cloths to prevent water from
entering into the appliance and irreparably damaging it.
NEVER IMMERSE THE APPLIANCE INTO THE WATER.
16
Technical informations
Instructions for use
Maintenance
GB
GB
GB
Publicidad
