Slim Duct Type
Operation section
Push each button to select a desired operation.
• The details of the operation needs to be set up once, afterward, the air conditioner can be used by
pushing
1
Selects the desired air volume mode.
2
TIMER SET button is used when the timer is
set up.
3
The CHECK button is used for the check
operation. During normal operation, do not
use this button.
4
Ventilation button is used when a fan which is
sold on the market is connected.
• If "No function
remote controller when pushing the
Ventilation button, a fan is not connected.
5
Resets (Erases) "FILTER
6
SAVE button is used for power save
operation.
7
button)
No Function.
8
Operation lamp
Lamp is lit during the operation. Lamp is off
when stopped.
Although it flashes when operating the
protection device or abnormal time.
7-EN
button only.
12
2
5
3
button (Air volume select button)
button (Timer set button)
button (Check button)
button (Ventilation button)
" is displayed on the
button (Filter reset button)
button (Power save operation)
button (Swing/Wind direction
1 8
7
9
10
11
12
" display.
OPTION :
Remote controller sensor
Usually the TEMP. sensor of the indoor unit
senses the temperature. The temperature on the
surrounding of the remote controller can also be
sensed.
For details, contact the dealer from which you
have purchased the air conditioner.
– 7 –
6
button
When the button is pushed, the operation
starts, and it stops by pushing the button again.
When the operation has stopped, the
operation lamp and all the displays disappear.
button (Operation select button)
Selects desired operation mode.
button (Unit/Louver select button)
Selects a unit number (left) and louver
number (right).
UNIT:
Selects an indoor unit when adjusting wind
direction when multiple indoor units are
controlled with one remote controller.
LOUVER:
No Function.
button (Set up temperature button)
Adjusts the room temperature.
Set the desired set temperature by pushing
TEMP.
or
TEMP.
Owner's Manual
9
10
4
11
.