Westinghouse WH3250 Manual Del Propietário página 17

4. Install the mounting foot to the frame using M6
flange bolts and nuts.
Figure 12 - Assemble Mounting Foot to Frame
7. Install the handles using the clevis pin and hairpin
cotter as shown in Figure 14.
,
6.
1 - Rubber Pads 3- M6 Flange Bolt
2- Mounting Foot and Nut
Install the 16 mm x 105 mm axle pin through the
axle bracket on the frame.
Install the hairpin cotter through the axle pin.
Figure 14 -Attaching the Handles
1 - Clevis Pin 3 - Hairpin Cotter
2- Handle
Figure 13 -Assemble Wheels to Frame
1 - Axle Pin 2 - Hairpin Cotter
17