Ridgid Kollmann K-1500G Manual De Instrucciones página 9

V-Belt Adjustment
Check the V-Belt periodically for loosening. V-Belt should
not be too tight or excessive wear will occur.
1. Tighten V-Belt, remove guard 23547.
2. Turn Belt-Tension Hex Nuts 43827 slowly clockwise,
until V-Belt stiffens.
NOTE! Proper tension is realized when V-Belt moves ap-
proximately / " under finger pressure.
1
4
Machine Care
Engine driven equipment must be kept indoors or well
covered in cold or rainy weather. If machine has been ex-
posed to freezing weather, unit must be run for ten or
twenty minutes without load to warm up. Failing to do this
will result in frozen bearings.
Cables
Store cable indoors, when not using, to protect from
the elements. Replace when old or worn.
K-1500G Drain Cleaning Machine
Ridge Tool Company • Elyria, Ohio • U.S.A. 7