27, USEonlyasdescribed in thisinstruction m anual,
USEaccessories onlyrecommended by Sears,
28, USERECOMMENDED
SPEEDS foralloperations,
Otherspeeds maycausethemachine tomalfunc°
tioncausing damage tothedrillpressandor
serious injury,
29, information r egarding t hesafeandproper operation
ofthistoolis abo availabb fromthefollowing
sources:
Power Tool institute
1300 Summer Avenue
Cbveland,
OH 44115-2851
www, powertoolinstitute,org
National Safety Council
1121 Spring Lake Drive
Itasca, IL 60143-3201
American National Standards institute
25 West 43rd Street, 4th floor
New York, NY 10036
www, ansi,org
ANSi 01,1 Safety Requirements for
Woodworking
Machines, and the
U,S, Department of Labor regulations
www, osha,cj__
30, SAVE THESE INSTRUCTIONS,
Refer to them
frequently and use them to instruct other users,
ADDmONAL
SAFETY
RULES
FOR THE LASER
1,
LASER LIGHT - DO NOT STARE INTO BEAM,
APERTURE,
or into a reflection from a mirror-like
surface,
2,
AVOID EXPOSURE - LASER LIGHT IS EMITTED
FROM BOTH SIDES OF LASER ASSEMBLY,
Use of controls or adjustments, or performance of
procedures other than those specified herein may
result in hazardous laser light exposure,
3,
DO NOT DISASSEMBLE
LASER MODULE,
The
laser is a CLASS 11LASER PRODUCT that can
emit laser power up to 1 mW MAX at 635 nm,
which could result in exposure with the module
disassembled,
The laser unit complies with 21
CFR 1040,10 and 1040,11,
4,
USE OF CONTROLS OR ADJUSTMENTS
OR
PERFORMANCE
OF PROCEDURES
OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS
RADIATION EXPOSURE.
AVAILABLE
ACCESSORIES
Visit your Sears Hardware Department or see the
Craftsman Power and Hand Tool Catalog for the follow-
ing accessories,
iTEM
STOCK NUMBER
* Circle Cutter
25293
* Clamping Lit
26426
* 8-in, Vise
24077
* 4-in, Vise
24081
* 3-in, Vise
24071
* 21 pc, Sanding Drum Kit
25262
* 7 pc, Forstner Bit Set
25389
Sears may recommend other accessories not listed in
this manual
See your nearest Sears Hardware Department or
Craftsman Power and Hand Tool Catalog for other
accessories,
Do not use any accessory unless you have completely
read the instruction Manual for that accessory,
Use only accessories recommended
for this drill press,
Using other accessories may cause serious injury and
cause damage to the drill press,