KALLISTA P70080-00 Guia De Instalacion página 2

Thank You For Choosing Kallista
We appreciate your commitment to Kallista quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kallista.
Tools and Materials
10" Adjustable
Supply
Wrench
Shut-Off
Valve
Tubing Cutter
Wax Seal
Before You Begin
CAUTION: Risk of personal injury or product damage. Handle
with care. The product can break, chip, cause injury, or product
damage if handled carelessly. Get assistance lifting the product
into place.
CAUTION: Risk of hazardous gases. If the new toilet is not
installed immediately, temporarily place a large damp rag in the
closet flange to limit exposure to sewer gases.
Observe all local plumbing and building codes.
Carefully inspect the new toilet for damage.
This one-piece toilet includes a standard trip lever and toilet seat.
The aesthetic appearance of your toilet may differ from the
illustration. The installation instructions still apply.
If the existing toilet does not have a supply shut-off valve below
the tank, install one before installing the new toilet.
If the floor or closet flange is not level, the toilet may not be level
after it is installed.
1019843-2-A
All manuals and user guides at all-guides.com
Tape
Level
Pipe Wrench
Measure
Plus:
• 5/16" T-Bolts w/ Nuts
and Washers
• Screwdriver
Putty
• Safety Glasses
Hacksaw
Knife
• Sponge
2 Kallista