1
1.1-1.2. Position the wall track (A) as illustrated. Level the track (A) and mark the track holes positions.
1.3. Remove the track and drill pilot holes in the marked locations with a ø5/16 in drill bit.
1.4. If there are no studs located behind the wall track (A), then insert the wall anchors (AA) using a rubber mallet until the wall
anchors are flush with the wall.
1.5. Replace and secure the track (A) with screws (BB). Do not overtighten.
1.1
13/16 in
1.2
A
1.3
ø5/16 in
1.4
AA
WALL TRACK INSTALLATION
A
A
RIGHT DOOR OPENING
A
If there are no studs aligned
to the wall track behind the
drywall, use the wall anchors
to ensure the screws won't
AA
BB
WARNING!
become loose.
LEFT DOOR OPENING
1.5
BB
PAGE 11