Track Control Knobs (Track/Hq Control); Track Group Select Button (Track Group); Track Status Buttons (Track Status/Hq Part) - Edirol UR-80 Manual Del Usuario

Track control knobs (TRACK/HQ CONTROL)

These knobs control the pan, reverb send, chorus send, or channel parameters of each channel.
Use the assign button to select the parameter.
When PAN, SEND1, or SEND2 is selected
The knobs will control the pan, reverb send, or chorus send of each channel. You can control
channels 1–16 by operating the track group select button.
When HQ is selected
The knobs will control channel parameters. You can control the following eight parameters.
Track control knob
CUTOFF
RESONANCE
VIB RATE
VIB DEPTH
VIB DELAY
ATTACK
DECAY
RELEASE
Use the track status buttons and the track group select button to select the channel you want
to control.

Track group select button (TRACK GROUP)

This button switches the group of channels (1-8/9-16) whose parameters will be controlled.

Track status buttons (TRACK STATUS/HQ PART)

When HQ is selected by the assign button, these buttons select the channel whose parameters will
be controlled by the track control knobs. Use these buttons in conjunction with the track group
select button.
Parameter
Filter cutoff
Filter resonance
Vibrato rate
Vibrato depth
Vibrato delay
Attack time
Decay time
Release time
Synth Edit mode
69