Oase WATER TRIO Instrucciones De Uso página 22

Installation variants
• Variant (a): without extension tubes
– At water levels between 80 and 240 mm, the unit is positioned on a horizontal surface with-
out extension tubes.
• Variant (b): with extension tubes
– At water levels between 240 and 440 mm the unit is positioned on a horizontal surface with
the supplied extension tubes.
Installation and connection
The use of the pump is only permitted with observance of the specified water quality.
(→ Permissible water quality)
WARNING
The power supply carries dangerous electrical voltage and must not be placed directly near wa-
ter. Otherwise, there is a risk of serious injury or death from electric shock.
 Install the power supply in a flood-protected position at least 2 m from the water.
NOTE
If the pump is used for conveying excessively soiled water, the impeller unit will be subject to in-
creased wear and will require earlier replacement.
Thoroughly clean the pond or pool before installing the pump.

 Install the pump at a raised level above the bottom. This reduces intake of muddy water.

Avoid direct sunlight on unit components that are not submerged, as they may overheat. If
necessary, use a protective cover.
22
WTO0022