Publicidad
Idiomas disponibles
Idiomas disponibles
Maintenance
Emptying
the Collection
Tank
1. Verify that the power cord is
disconnected
from the outlet. (Fig. 1)
2. Disconnect the hose from the vacuum.
(Fig. 2)
3. Undo the latches and remove the
power head from the collection tank.
(Fig. 3)
4. Clear all dirt or debris from the
collection tank and hose. (Fig. 4)
5. Clean the foam filter by washing it with
water and mild soap. (Fig. 5)
6. Check the hose, attachments, and
power cord to verify that they have not
been damaged.
IMPORTANT! Clean or change the
cartridge
filter regularly for best
performance.
ALWAYS USE DUST FILTER FOR DRY
VACUUMING. If the machine is used
without the cartridge filter, the motor will
burn out and the warranty will be voided.
Always keep spare filters on-hand.
NOTICE! The filters included are made
of high quality material designed to stop
small dust particles.
The cartridge filter
should be used for dry pick-up only. A
dry cartridge filter is necessary to pick up
dust. If the cartridge filter is wet, it will
clog quickly and be very difficult to clean.
Handle the filter carefully when removing
it for cleaning and replacing it. Check
the filters for tears or small holes, a small
hole can let dust pass through and out of
the cleaner. Do not use a filter with holes
or tears in it, replace it immediately.
[_
WARNING:
Always disconnect
the plug from the power outlet before removing
i
the power head from collection
tank.
!
Installing
& Cleaning
The Cartridge
Filter
Instafling Cartridge Filter
1. Verify that the power cord is
disconnected
from the outlet. (Fig. 1)
2. Remove power head and place in
upside down position.
3. Install the cartridge filter over the filter
cage and carefully push filter in until it
stops against the power head.
(Fig. 2 & 3)
4. Place filter retainer on top of cartridge
filter and tighten down by turning
retainer clockwise.
(Fig. 4 & 5)
Removing and Cleaning Cartridge Filter
1. Unlock and remove the filter retainer
by turning retainer handle counter
clockwise.
2. Carefully hold and pull the cartridge
filter up for removal. (Fig. 6)
3. Clean the cartridge filter by gently
tapping or brushing dirt off. Cleaning
should not be done indoors in living
areas. For optimal performance a new
filter is recommended.
10
Publicidad
